What to Ask Your Cleaning Company About the Chemicals It Uses

Before a cleaning company starts in your building, ask it for a list of every product it will use and a safety data sheet (SDS) for each one, then ask how those products are labeled, diluted, stored, and kept apart. Under OSHA's Hazard Communication standard, an employer that brings hazardous chemicals into a workplace shared with another employer's staff needs a way to give that other employer access to the safety data sheets and the precautions that go with them. A good cleaning company will hand this information over without being chased.
Most facility managers only think about cleaning chemicals when something goes wrong: a strong smell in the morning, a complaint about a residue on desks, or a question from a tenant about what was sprayed in the break room. The questions below help you get ahead of that, whether you are vetting a new vendor or checking on the one you have.
1. Ask for the product list and the safety data sheets
A safety data sheet is the manufacturer's document for a chemical product. OSHA requires a standard format with 16 sections, covering things like hazards, first aid, handling and storage, and exposure controls.

The product list should match what is actually in the closet. If the list says three products and the shelf holds eight, ask about the other five. Keep a copy of the sheets somewhere your own staff can reach, and ask to be told when a product changes. It also helps to list those chemical and SDS expectations in a written scope of work.
2. Ask how the sheets will be available in your building
OSHA expects employers to keep safety data sheets readily accessible to their employees during each work shift. For a cleaning company, that means its crew needs access while working in your building, often after hours when no one else is around.
Ask where the sheets will live: a binder in the janitor's closet, a shared online folder, or both. Also ask how your team can reach them if a cleaning product is spilled or someone has a reaction during the day.
3. Ask how containers are labeled
Concentrates are often diluted into spray bottles or buckets on site. A bottle with no label, or with a handwritten word on masking tape, gives no one useful information in an emergency.
Ask whether every secondary container carries the product name and its hazard information, and whether diluted products are mixed with a measured dispenser or by eye. Measured dilution keeps solutions at the strength the label calls for, which matters for both results and residue.
4. Ask which products are disinfectants and how they are used
In the United States, disinfectants are regulated as pesticides, and each one carries an EPA registration number on its label. The EPA notes that the label directions are legally binding, including which surfaces the product is meant for and how it must be applied.
Ask which of the vendor's products are registered disinfectants, where in your building they will be used, and whether the crew follows the label's directions for each one. If you want more depth on disinfection in commercial buildings, see our post on the benefits of disinfecting cleaning services.
5. Ask about mixing and storage
EPA guidance on cleaning and disinfecting public spaces warns that bleach should not be mixed with other cleaning and disinfection products because the combination can cause fumes that may be very dangerous to breathe in. The same caution applies to other products that are not meant to be combined.
Ask the vendor how its crew avoids mixing incompatible products, and where products will be stored in your building. Chemicals should sit in a closet or cabinet that occupants do not use, with caps closed and containers upright, away from food areas.
6. Ask what happens when someone reports a smell or reaction
Occupant complaints about odors are common, especially in buildings where air handling runs on a reduced schedule overnight. The answer you want is simple: a named contact, a way to identify which product was used where, and a willingness to adjust.
Ask who you call, how fast they respond, and whether the vendor can switch a product in a sensitive area such as a clinic exam room, a childcare room, or an office where someone has asthma.
7. Ask how the crew is trained on the products
OSHA's standard also requires employers to train employees on the hazardous chemicals in their work area. You do not need to audit a vendor's training records, but you can ask how new cleaners learn which product goes where, how to read a label, and what protective gear the products call for.
A clear answer here usually tells you a lot about how the rest of the account will be run.
What about the cleaning products your own staff use?
Many offices keep their own wipes or sprays for desks and kitchens. OSHA has explained in an interpretation letter on office cleaning products that a consumer product can fall outside the standard when employees use it the way a consumer would, at no greater duration and frequency. Routine cleaning as part of someone's job is different. If you are unsure where your own products fall, OSHA's guidance or a safety professional can help you sort it out.
It also helps to tell your cleaning company what your staff keep on hand, so the crew does not use something on top of a product it cannot safely be combined with.
Get your chemical questions answered up front
Chemical questions are a reasonable part of choosing any cleaning company, for an office, clinic, warehouse, school, or any other commercial building. Clear Facility Services can serve buildings across Hennepin, Ramsey, Anoka, Scott, Dakota, and Carver counties, with cleaning usually scheduled after hours for offices and other workplaces. Bring your questions about products to your free estimate, call +1 (952) 900-2215, or email info@clearfacilityservices.com.
Frequently asked questions
Does my cleaning company have to give me safety data sheets?
When a cleaning company brings hazardous chemicals into a building where your employees could be exposed, OSHA's Hazard Communication standard calls for a way to give your company access to the safety data sheets and related precautions. Ask for them at the start of service and whenever a product changes.
What is the difference between a cleaner and a disinfectant on the label?
A disinfectant is registered with the EPA as a pesticide and shows an EPA registration number on its label, along with directions for use. A general cleaner removes soil and does not carry that registration.
Should my office keep its own copy of the cleaning company's safety data sheets?
Keeping a copy, or a link to the vendor's online folder, is a practical step. It means your team can look up a product right away if there is a spill or a reaction during business hours, when the cleaning crew is not in the building.
Cover photo: Famartin, Wikimedia Commons, CC BY-SA 4.0




